Slant Bottom with Lock-Lever Ring type closure
The KTT series of slant bottom containers allows the contents to drain completely. The open top facilitates total cleanability, yet provides an air tight seal when the lid is used with a lock-lever ring and gasket.
- 316L stainless steel container and lid
- Seamless sanitary interior and exterior with radiused bottom corner
- 304 Stainless lock-lever ring which can accept a tamper evident seal (sizes KTT-CTL-30 through KTT-CTL-47H)
- 304 stainless steel hollow side handles
- Air/water tight seal with lock-lever ring and platinum-cured silicone gasket
- 10 Ra finish standard
Options
- KM Series dollies available for size KTT-CTL-30 through KTT-CTL-565H container
- Passivation
- Electropolished finish (10 Ra or better)
- Gaskets – EPDM, Viton®
- Custom Modifications Available
Not to be used with pressure or vacuum.
Filters Sort results
Reset Apply
Model # | Vol. Nominal | ID | Height | Thickness | Weight | Tri-Clamp | Data Sheet |
|---|---|---|---|---|---|---|---|
2.64 US Gal / 10.0 L | 9.45 in / 240 mm | 13.2 in / 335.3 mm | .039 in / 1.0 mm | 10.6 lb / 4.8 kg | 1.5 in | ||
5.3 US Gal / 20.0 L | 11.81 in / 300 mm | 15.55 in / 395.0 mm | .039 in / 1.0 mm | 12.1 lb / 5.5 kg | 1.5 in | ||
9.2 US Gal / 35.0 L | 14.17 in / 360 mm | 17.91 in / 455.0 mm | .039 in / 1.0 mm | 15.5 lb / 7.0 kg | 1.5 in | ||
17.2 US Gal / 65.0 L | 16.93 in / 430 mm | 22.05 in / 560.0 mm | .039 in / 1.0 mm | 22.7 lb / 10.3 kg | 1.5 in | ||
19.8 US Gal / 75.0 L | 18.50 in / 470 mm | 23.03 in / 585.0 mm | .047 in / 1.2 mm | 30.6 lb / 13.9 kg | 1.5 in | ||
26.4 US Gal / 100.0 L | 18.50 in / 470 mm | 27.76 in / 705.0 mm | .047 in / 1.2 mm | 34.8 lb / 15.8 kg | 1.5 in | ||
37.0 US Gal / 140.0 L | 22.24 in / 565 mm | 29.13 in / 740.0 mm | .047 in / 1.2 mm | 40.1 lb / 18.2 kg | 2.0 in | ||
52.8 US Gal / 200.0 L | 22.24 in / 565 mm | 40.16 in / 1020.0 mm | .047 in / 1.2 mm | 51.1 lb / 23.2 kg | 2.0 in |
