STB Series Bottles
This series of bottles, US Patent 7,469,792 B1, is designed for stability studies where storage of the sample in stainless steel is required. The STB Series radiused interior increases its cleanability and optional fill, vent tubes may be added to the endcap.
- 316L stainless steel bottle and endcap
- Machined from certified solid-bar 316L stainless steel
- Traceability/certifications for all stainless steel lots
- Heat/lot numbers are laser engraved on each bottle
- Available in sizes from 1 mL to 750 mL
- Air/water-tight design
- 10 Ra or better electropolished interior finish
- 316L endcap, 304 two-segment heavy-duty clamp and platinum-cured silicone gasket (standard)
- Type III DMF
Options
- 304, 317L stainless steel, Hastelloy or others upon request
- EPDM, PTFE, BUNA-N, Viton® and other material gaskets available
- Custom Modifications Available
Not to be used with pressure or vacuum.
Filters Sort results
Reset Apply
Model # | Vol. Nominal | Vol. Actual | Height | Depth | Tri-Clamp | Weight | Data Sheet |
|---|---|---|---|---|---|---|---|
1.0 mL | 1.5 mL | 2.50 in / 63.5 mm | 0.56 in / 14.22 mm | 1.0 in | 1.73 lb / .78 kg | ||
2.0 mL | 2.5 mL | 2.50 in / 63.50 mm | 0.31 in / 7.87 mm | 1.0 in | 1.71 lb / .77 kg | ||
5.0 mL | 6.3 mL | 2.50 in / 63.5 mm | 0.71 in / 18.03 mm | 1.0 in | 1.66 lb / .73 kg | ||
10.0 mL | 13.0 mL | 2.50 in / 63.50 mm | 1.40 in / 35.56 mm | 1.0 in | 1.54 lb / .70 kg | ||
25.0 mL | 30.0 mL | 2.50 in / 63.50 mm | 1.32 in / 33.50 mm | 1.5 in | 1.22 lb / .55 kg | ||
55.0 mL | 56.0 mL | 2.50 in / 63.50 mm | 2.40 in / 60.96 mm | 1.5 in | .78 lb / 0.35 kg | ||
110.0 mL | 130.0 mL | 3.38 in / 85.73 mm | 3.06 in / 77.72 mm | 2.0 in | 1.70 lb / 0.77 kg | ||
250.0 mL | 281.0 mL | 4.25 in / 107.95 mm | 4.03 in / 102.24 mm | 2.5 in | 2.57 lb / 1.17 kg | ||
500.0 mL | 557.0 mL | 5.63 in / 142.88 mm | 5.38 in / 136.53 mm | 3.0 in | 2.77 lb / 1.26 kg | ||
750.0 mL | 815.0 mL | 4.75 in / 120.65 mm | 4.50 in / 114.30 mm | 4.0 in | 4.11 lb / 1.86 kg |
*Special Order
